manualshive.com logo in svg

Ricoh MP 2001, Руководство по эксплуатации

Поделиться
Скачать
Ricoh MP 2001 Скачать руководство пользователя страница 16

• After you move the machine, use the caster fixture to fix it in place. Otherwise the machine might

move or come down to cause an injury.

• If the lower paper tray or lower paper trays is installed, do not pull out more than one tray at a

time when you are changing or replenishing paper or resolving paper jams. Pressing down
forcefully on the machine's upper surfaces can result in malfunctions and/or user injury.

• Contact your service representative if you need to lift the machine (such as when relocating it to

another floor). Do not attempt to lift the machine without the assistance of your service
representative. The machine will be damaged if it topples or is dropped, resulting in
malfunction and risk of injury to users. The machine's various handling areas are for service
engineer use only. Do not touch these areas.

• Do not look into the lamp. It can damage your eyes.

• Do not hold the control panel while moving the machine. Doing so may damage the control

panel, cause a malfunction, or result in injury.

• Protect the machine from dampness or wet weather, such as rain and snow.

• For environmental reasons, do not dispose of the machine or expended supply waste at

household waste collection points. Disposal can take place at an authorized dealer.

• Keep your hands away from the hinges and exposure glass when lowering the ADF. Not doing

so may result in an injury if your hands or fingers are pinched.

Handling the machine's interior

This section explains safety precautions about handling the machine's interior.

14

Содержание MP 2001





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды