Ricoh M160, Руководство по обслуживанию

Страница: 792 / 836

Service RAM Addresses
SM 136 M160/M161 Fax Option
Bits 1 and 2: Not used
Bit 3: Receive rejection for 1300 Hz transmission 0: Off (receive), 1: On (not receive)
Bit 5: Print documents that are forwarded to other parties with Forwarding per Sender 0: Off, 1:
On
Bit 6: Printout of messages received while acting as a forwarding station 0: Off, 1: On
Bit 7: Not used
6800DD(H) - User parameter switch 13 (SWUSR_0D) : Not used
6800DE(H) - User parameter switch 14 (SWUSR_0E)
Bit 0: Message printout while the machine is in Night Printing mode 0: On, 1: Off
Bit 1: Maximum document length detection 0: Double letter, 1: Longer than double-letter (well
log) – up to 1,200 mm
Bit 2: Not used
Bit 3: Fax mode settings, such as resolution, before a mode key (Copy/Fax/Printer/Scanner) is
pressed 0: Not cleared, 1: Cleared
Bit 7: Not used
6800DF(H) - User parameter switch 15 (SWUSR_0F)
(This switch is not printed on the user parameter list.)
Bits 0, 1 and 2: Cassette for fax printout
Bit 2: 0, Bit 1: 0, Bit 0: 1 = 1st paper feed station
Bit 2: 0, Bit 1: 1, Bit 0: 0 = 2nd paper feed station
Bit 2: 0, Bit 1: 1, Bit 0: 1 = 3rd paper feed station
Bit 2: 1, Bit 1: 0, Bit 0: 0 = 4th paper feed station
Bit 2: 1, Bit 1: 0, Bit 0: 1 = LCT
Other settings Not used
Bit 5: Using the cassette specified by bits 0, 1 and 2 above only 0: On, 1: Off
6800E0(H) – User parameter switch 16 (SWUSR_10) : Not used
6800E1(H) – User parameter switch 17 (SWUSR_11)
Bit 0: Not used
Bit 1: Prohibit broadcasting 0: No, 1: Yes
Bit 2: Inclusion of the “Add” button when a sequence of Quick/Speed dials is selected for
broadcasting 0: Not needed, 1: Needed
Bits 3: Whether or not to reset the settings when original is scanned 0: On, 1: Off
Bits 4: Display the confirmation message prompting the user to check the destination before
sending a file 0: No, 1: Yes
Bits 5: Automatic entry of the external line access code 0: Off, 1: On
Bits 7: Not used
6800E2(H) - User parameter switch 18 (SWUSR_12)
Bit 0: TTI date 0: Off, 1: On
Bit 1: TTI sender 0: Off, 1: On