Ricoh M160, Руководство по обслуживанию

Страница: 689 / 836

IP-Fax Troubleshooting
M160/M161 Fax Option 33 SM
M
160/
M
161 F
A
X
OP
T
ION
Check Point Action
IP-Fax bandwidth is the same as the
DCS speed. Set IP-Fax SW00 Bit 6 to
1.
12 Remote fax cancelled transmission? Check whether the remote fax
cancelled the transmission.
Cannot send via VoIP Gateway
Check Point Action
1 LAN cable connected? Check the LAN cable connection.
2 VoIP Gateway T.38 standard? Contact the network administrator.
3 VoIP Gateway installed correctly? Contact the network administrator.
4 VoIP Gateway power switched on? Contact the network administrator.
5 Is the IP address/host name of the
specified Gateway correct?
Check the IP address/host name.
6 Number of the specified fax correct? Check the remote fax number.
7 Firewall/NAT is installed? Cannot breach the firewall. Send by
using another method (Fax, Internet
Fax)
8 Transmission sent manually? Manual sending not supported.
9 IP address of local fax registered? Register the IP address.
10 DNS registered when host name
specified?
Contact the network administrator.
11 Remote fax a G3 fax? Check that the remote fax is a G3 fax.
12 G3 fax is connected to VoIP gateway? Check that G3 fax is connected.
13 Remote G3 fax turned on? Check that G3 fax is switched on.
14 Network bandwidth too narrow? Request the network administrator to
increase the bandwidth.