Ricoh M160 Скачать руководство пользователя страница 237

Страница: 237 / 836

Address Book Upload/Download

5-17

M160/M161

yst

int



If the capacity of SD card is not enough to store the local user information, an error

message is displayed.



Carefully handle the SD card, which contains user information. Do not take it back to your

location.

5.4.3 DOWNLOAD (RESTORE) TO MACHINE

1. Turn off the main power switch.

2. Remove the SD card slot cover [A] ( x 1), and then install the SD card, in which the

data has been uploaded, into the SD card slot 2 [B].

3. Turn on the main power switch.

4. Enter the SP mode, and then execute SP5-846-052 (Restore All Addr Book).

5. Exit from the SP mode, and then turn off the main power switch.

6. Remove the SD card form the SD card slot 2.

7. Install the SD card slot cover.

8. Turn on the main power, and then check that the address book has been restored.



The counter in the user code information is initialized after uploading.



The information of an administrator and supervisor cannot be downloaded nor uploaded.



If there is no data of address book information in the SD card, an error message is

displayed.

5.4.4 ERASING THE BACKUP DATA

After restoring the data, execute SP5-846-053 (Clear Backup Info) to erase the address book data

stored in the SD card.

Содержание M160





































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание M160

Отзывы:

Похожие инструкции для M160

Бренды по названию

Популярные бренды

Ricoh M160, Руководство по обслуживанию

Результаты поиска

Содержание M160

Отзывы:

Похожие инструкции для M160

Бренды по названию

Популярные бренды