Ricoh M156, Руководство по обслуживанию

Страница: 99 / 169

Service Program Mode
M156/M157/M176/M177 5-12 SM
Fax Maintenance
Redialings
Sets the number of redials when Tx fails.
[2 times (Default)/ 3 Times/ 4 Times/ 5
Times]
Overseas Comm
Mode
Overseas Comm
Mode
This sets the machine to ignore a DIS signal
sent from the called station once in a
sending operation.
[Off (Default)/ Ignore DIS Once]
Minimum Time
Length
If this setting is set to "On", the machine
detects the CNG signal after the line is
connected. If it is set to "Off", the machine
detects the CNG signal as long as the line is
connected.
[100 Ms/ 200 Ms/ 300 Ms/ 400 Ms (Default)]
Dial Pulse Setting Dial Pulse Type
This sets the number of pulses that are
generated during dialing.

N: Dialing '0' generates 10 pulses ---
Dialing '9' generates 9 pulses. (Default)

N+1: Dialing '0' generates 1 pulses ---
Dialing '9' generates 10 pulses.

10-N: Dialing '0' generates 10 pulses ---
Dialing '9' generates 1 pulse.
Tone Signal Settings
Tone Signal
Transmission T
Sets the tone signal transmission time length
[100 ms (Default)]
Minimum Pause
In Tone Dial
Sets the minimum pause during tone dialing
[100 ms (Default)/ 150 ms/ 200 ms]
Attenuator of
Pseudo Ring
Sets the attenuator for pseudo ringback tone
to the line
[0 to 15 / 10 (Default)/ 1 dB/step]
DTMF Level
Sets the transmission level of DTMF tones.
[-12 dBu / -11 dBu/ -10 dBu/ -8 dBu (Default)/
-6 dBu]