Ricoh M156 Скачать руководство пользователя страница 169

Страница: 169 / 169

Overview

SM Appendix

2-15

M156/M157/M176/M177

r M

Error Code

Description

Solution

4xxx42

Invalid part header

(E-mail reception failed)

Ask the sender to check the e-mail

settings.

4xxx43

Codec Error (A TIFF file

could not be received

properly.)

The compression method of the received

TIFF file was other than MH/MR/MMR.

Ask the sender to check the TIFF file.

4xxx44

TIFF over spec (A TIFF

file could not be received

properly.)

The resolution of the TIFF file was not

supported, or the width of the TIFF file was

A3 or B4. Ask the sender to check the

TIFF file.

4xxx45

TIFF Form abnormal (A

TIFF file could not be

received properly.)

The format of the TIFF file was other than

TIFF-S/F. Ask the sender to check the

TIFF file.

4xxx46

Memory Overflow (The

machine memory

reached capacity)

The fax was too large. Ask the sender to

resend the document in parts as several

smaller individual faxes, or send at a lower

resolution.

Содержание M156










































































































































































Результаты поиска

Содержание M156

Отзывы:

Похожие инструкции для M156

Бренды по названию

Популярные бренды

Ricoh M156, Руководство по обслуживанию

Результаты поиска

Содержание M156

Отзывы:

Похожие инструкции для M156

Бренды по названию

Популярные бренды