Ricoh M118, Руководство по обслуживанию

Страница: 117 / 226

Image Adjustment
SM 5-11 M118/M119
S
yst
em
M
ai
n
te
n
an
ce
Ref
eren
ce
Engine Maintenance
Waste toner
disposal
Independent-Supply
Toner
Sets the machine operation at "waste toner full"
of the refilled AIO.
[On or Off (Default)]

With main motor rotation count feature,
machine can be set to stop printing after
print total exceeds a certain set value. If
print count exceeds this value, then
"Replace Print Cartridge" remains in
display. Then a new AIO cartridge must
be installed. This feature is a safety
measure to prevent the used toner tank
from becoming full (there is no toner
overflow detection mechanism).
Test Pattern Prints the test pattern.
Curl Control
Mode
Corrects the face curl of paper.
0: OFF (28ppm)
1: Sets the engine speed at 14ppm after printing 1 minute.
2: Sets the engine speed at 14ppm.
3 to 255: not available
[0 to 255 / 0 / 1 /step]
Adjust Charge
Bias
Charge bias correction for dirty background
0: OFF (Default)
1: ON
2 to 255: not available
[0 to 255 / 0 / 1 /step]
1200dpi LD
Power
Adjusts print density (density levels by increasing the number)
[31 to 155 / 112 (Default) / 1 /step]