Ricoh M118, Руководство по обслуживанию

Страница: 192 / 226

Error Messages
SM Appendix 3-4 M118/M119
Message Causes Solutions
Cannot copy.
Set original to ADF.
Combined copying/2-sided
copying could not be
performed because the
originals were not placed in
the ARDF or ADF.

Use the ARDF or ADF, even
when copying a single sheet.

If you need to use the exposure
glass, turn off combined
copying/2-sided copying in
[Duplex/Combine] under copy
settings, and then try again. See
the user’s guide.
Check Paper Size The paper size set for the
document differs from the size
of the paper in the indicated
tray.
Press [FormFeed] to begin printing,
or press [JobReset] to cancel the job.
Check Paper Type The paper type set for the
document differs from the type
of the paper in the indicated
tray.
Press [FormFeed] to begin printing,
or press [JobReset] to cancel the job.
Connection Failed
The line could not be
connected correctly.

Confirm that the telephone line is
properly connected to the
machine.

Disconnect the telephone line
from the machine, and connect a
standard telephone in its place.
Confirm that you can make calls
using the telephone. If you
cannot make calls this way,
contact your telephone company.
Cover open A cover is open. Close the cover completely.
Dest. is not
Programmed No Quick Dial entry is
associated with the One
Touch button you pressed.

Press a different One Touch
button.

Assign a registered destination to
the One Touch button. See the
user’s guide.