Ricoh M118, Руководство по обслуживанию

Страница: 196 / 226

Error Messages
SM Appendix 3-8 M118/M119
Message Causes Solutions
Memory Overflow
TX
Cancel
Memory has reached capacity
while scanning the second or
later pages of the original
when trying to send a fax in
Memory Transmission mode.
Press [TX] to send only the pages
that have been scanned in memory,
or press [Cancel] to cancel.
Misfeed: Bypass
Tray
Paper has been jammed in
the bypass tray.
Remove the jammed paper. See the
user’s guide.
Misfeed: Dup. Unit
Remove Paper
Paper has been jammed in
the duplex unit.
Remove the jammed paper. See the
user’s guide.
Misfeed: Stnd. Tray Paper has been jammed in
the paper exit area.
Remove the jammed paper. See the
user’s guide.
Misfeed: Tray 1 Paper has been jammed in
the tray 1 paper input area.
Remove the jammed paper. See the
user’s guide.
Misfeed: Tray 2 Paper has been jammed in
the tray 2 paper input area.
Remove the jammed paper. See the
user’s guide.
Net
Communication
Error
Connection with the server
was lost while sending or
receiving data.
Contact the network administrator.
Network is not
Ready
A scanned file could not be
sent because the machine
has not received IP address
information from the DHCP
server completely.
Wait until the machine receives the IP
address information completely, and
then try the operation again.
On Hook or Stop
key
The machine has been
off-hook for an extended
period of time.
Put down the handset or press the
[Clear/Stop] key.
Out of Paper: X The indicated tray has run out
of paper.
Load paper to the indicated tray. See
User Guide.
Please Restart
Machine
The machine needs to be
restarted.
Turn off the power, and then turn it
back on.