Ricoh M080 Скачать руководство пользователя страница 33

Страница: 33 / 294

Installation Requirements

SM 2-1

M080

Inst

allation

2. INSTALLATION

2.1 INSTALLATION

REQUIREMENTS

2.1.1 ENVIRONMENT

Temperature/Humidity

Ranges:

Acceptable:

10C (50F) 15% to 27C (80.6F) 80%

Recommended (Office):

15C (59F) 30% to 25C (77F) 70%

Ambient Illumination:

Less than 2000 lux (do not expose to direct sunlight).

Ventilation: 3

times/hr/person

1. Avoid areas that are exposed to sudden temperature changes. This includes:

Areas directly exposed to cool air from an air conditioner.

Areas directly exposed to heat from a heater.

2. Do not install this machine in an area where it will be exposed to corrosive gases.

3. Do not install the machine at locations over 2,500 m (8,125 ft.) above sea level.

4. Put the machine on a strong and level base. Inclination on any side should not exceed 5

mm.

5. Do not put the machine where it may be subjected to strong vibrations.

Содержание M080







































































































































































































































































































Результаты поиска

Содержание M080

Отзывы:

Похожие инструкции для M080

Бренды по названию

Популярные бренды

Ricoh M080, Руководство по обслуживанию

Результаты поиска

Содержание M080

Отзывы:

Похожие инструкции для M080

Бренды по названию

Популярные бренды