Ricoh M080, Руководство по обслуживанию

Страница: 214 / 294

Printer Engine Service Mode
M080 3-36 SM Appendix
-2397 Incorrect ID2 format
-2398 Incorrect request number format
5816 209 Instl Clear
Releases the machine from its embedded RCG
setup.
5816 250 Comm Log Print Prints the communication log.
Note : The proxy number, user name, and password comprise proprietary customer information
required by the service technician to do the necessary settings for Cumin-N. To prevent
unauthorized access this information, these SP settings do not appear in the SMC report.
5821
Remote Service A(ddress)
5821 1 CSS-PI Device Co(de)
Sets the PI device code. After changing this
setting, you must switch the machine off and
on.
5821 2 RCG IP Address
Sets the IP address of the RCG (Remote
Communication Gate) destination for call
processing at the remote service center.
[00000000h to FFFFFFFFh/00000000h/
5823
Paper Supply for DFU
An @Remote setting. Not required for service technician.
5824
NVRAMUpload
Uploads the UP and SP mode data (except for counters and the serial
number) from NVRAM on the control board to a flash memory card.
While using this SP mode, always keep the front cover open. This prevents
a software module accessing the NVRAM during the upload.