Ricoh M080, Руководство по обслуживанию

Страница: 188 / 294

Printer Engine Service Mode
M080 3-10 SM Appendix
1002
Side to Side Reg Side-to-Side Registration
Adjusts the printing side-to-side registration from the 1st paper feed station
using the trimming area pattern (SP2-902 No.12).
Push [ ] or [ ] to select the settings (plus or minus).
Specification: 0 ±2.0 mm.
1002 001 1st Tray
[-40 to +40/ 0 /1]
1002 002 2nd Tray
1002 003 3rd Tray
1002 004 Bypass Tray
1002 005 Duplex
1003
Regist sag Registration Buckle Adjustment
Adjusts the relay clutch timing at registration. Relay clutch timing
determines the amount of paper buckle at registration. (A "+" setting causes
more buckling.)
1003 001 Cassette [–8 mm to+8 mm/ 0 /2 mm step]
1003 002 Multi Tray [–8 mm to+8 mm/ 0 /2 mm step]
1003 003 Duplex Tray [–8 mm to+8 mm/ 0 /2 mm step]
1104
Fusing control Normal, Phase control
Use phase control if the room lights flicker when the fusing lamp starts.
Off: Normal
On: Phase Control
Defaults : NA Off (Normal), EU On (Phase Control)