Ricoh M080, Руководство по обслуживанию

Страница: 209 / 294

Printer Engine Service Mode
SM Appendix 3-31 M080
Appe
ndix:
SP
Mode
Ta
b
le
s
14
The notification of the certification request has been received from the
rescue GW controller, and the certification is being stored.
15
The certification has been stored, and the GW URL is being notified of
the successful completion of this event.
16
The storing of the certification has failed, and the GW URL is being
notified of the failure of this event.
17
The certification update request has been received from the GW URL,
the GW URL was notified of the results of the update after it was
completed, but an certification error has been received, and the
rescue certification is being recorded.
18
The rescue certification of No. 17 has been recorded, and the GW
URL is being notified of the failure of the certification update.
5816 068
CERT:Error
Displays a number code that describes the reason for the request for update
of the certification.
0 Normal. There is no request for certification update in progress.
1
Request for certification update in progress. The current certification
has expired.
2
An SSL error notification has been issued. Issued after the certification
has expired.
3
Notification of shift from a common authentication to an individual
certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
5816 069 CERT Up ID The ID of the request for certification.
5816 083 Firm Up Status Displays the status of the firmware update.