Ricoh M080, Руководство по обслуживанию

Страница: 190 / 294

Printer Engine Service Mode
M080 3-12 SM Appendix
1911
Curl Control
Thin paper has a tendency to jam or wrinkle, especially during duplex
printing. When this SP code is switched on:
ƒ
The machine ignores the fusing temperature set for SP1105.
ƒ
When the machine is powered on or recovers from the low power mode
the machine requires about 20 sec. to warm up (this is longer than
normal).
[0 to 1/ 0 /1]
0: Normal
1: Curl Control
1913 SC559 Detect Fusing Jam SC Setting
This SP setting determines whether SC559 is issued after three paper late
jams occur in the fusing unit. After this SP code is turned on, a counter
monitors the number of paper late jams that occur in the fusing unit. After
the 3rd occurrence of a fusing jam, SC559 is issued and the machine
cannot be used until the service technician releases the error.
Note: Switching the machine off/on does not reset this jam counter. The
counter is reset after the cause of the jam has been removed and a sheet of
paper successfully passes the fusing exit sensor.
[0 to 1/ 0 /1]
0: No
1: Yes
1914 [Nip Measure] Fusing Nip Width Measurement
1914 001
Measure Exe.
[0 or 1 / 0 /-]
0: Not execute, 1: Execute
Performs the nip width measurement. This is for by-pass tray and used OHP
type.