SETTING UP THE SCANNER
1-6
Plug one end of the shielded high
density 50-pin SCSI II cable
(ANSI-compliant*1) into the SCSI
II port located on the back of the
scanner.
If you do not plan to connect
anything to the other port, cap it
with a terminator*2.
Plug the other end of the SCSI
cable into the host computer or
other peripheral.
*1 SCSI Cables
There are a variety of different SCSI connector types, including the high-density
50-pin connector, the D-sub 25-pin connector, and the 50-pin flat connector.
Both of the SCSI ports of this scanner require high-density 50-pin connectors.
When choosing a SCSI cable, get one that has a high-density 50-pin connector
on one end (to connect to the scanner), and a connector that meets the needs
of the port of your computer or the device you are connecting to. Also make sure
that the SCSI cable you use is ANSI-compliant.
Содержание IS01 - IS 01
Страница 1: ...Operator s Manual Image Scanner...
Страница 75: ...Part No G4058600 Printed in Japan...