SETTING UP THE SCANNER
1-12
DIP SWITCH SETTINGS
DIP switches on the back of the scanner can be used to control certain scanner
features and functions. The following describes the DIP switch settings that can
be made by you.
Note: You can change the settings of DIP switches 1, 3, and 4 only.
Never change the settings of switches 2, 5, 6, 7, or 8.
Switch 1 - SCAM Function
This switch is used only when there are two units of this scanner model
connected in the same SCSI chain, and the computer is equipped with a SCAM
adapter. In such a case, Switch 1 of one scanner must be set to ON (SCAM
disabled), while Switch 1 of the other scanner must be set to OFF(SCAM
enabled).
Switch 3 - Paper Size
This switch specifies the standard paper sizes the scanner should apply. OFF
specifies North American paper sizes, while ON specifies European paper sizes.
Switch 4 - IS410 Mode
This switch switches between Normal Mode and IS410 Mode. OFF specifies
Normal Mode, while ON specifies IS410 Mode.
If your application’s driver supports the IS410 but not this scanner, you can set
this DIP switch to its ON position to enable IS410 emulation. Because of
differences between the IS410 and this scanner, however, we cannot guarantee
100% compatibility when IS410 emulation is being used. We recommend that
you obtain the appropriate driver from your software dealer.
Default settings
Содержание IS01 - IS 01
Страница 1: ...Operator s Manual Image Scanner...
Страница 75: ...Part No G4058600 Printed in Japan...