Ricoh IS01 - IS 01, Руководство оператора

Страница: 10 / 75

SAFETY INFORMATION
v
12. Except as specifically explained in the operator’s manual, do not attempt to
service this device yourself. Opening or removing those covers that are
marked “Do Not Remove” may expose you to dangerous, voltage points or
to other risks. Refer all servicing in those compartment to service personel.
13. Unplug this machine from the wall outlet and refer servicing to qualified
service personal under the following conditions;
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the machine.
C. If the machine has been exposed to rain or water.
D. If the machine does not operate normally when the operating
instructions are followed. Adjust only those controls that are covered by
the operating instructions since improper adjustment of other controls
may result in damage and will often required extensive work by a
qualified technician to restore the machine to normal operation.
E. If the machine has been dropped or the cabinet has been damaged.
F. If the machine exhibits a distinct change in performance, indicating a
need for service.
14. Make sure that your wall outlet is close to the machine and is easily
accessible.
When you plug the machine into the outlet, make sure the plug is inserted
firmly.
15. The main plug on this machine must be used to disconnect main power.
Two kinds of size notation are employed in this manual.
16. Power Source: 120 V, 60 Hz, more than 10 A
Please make sure to connect the power cord to a power source as above.
17. In accordance with IEC417, this machine uses the following symbol for the
main switch:
means POWER ON
means POWER OFF
IMPORTANT INFORMATION