Ricoh IS01 - IS 01 страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 75

background image

Error! Reference source not found.

Note to users in the United States of America

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Warnig

Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.

Caution

Properly shielded and grounded cable and connector must be used for
connection to host computer in order to meet FCC Emission limits.

Note to users in Canada

This Class B digital apparatus meets all requirement of the Canadian Interference
Causing Equipment Regulations.

Remarque concernant les utilisateurs au Canada.

Cet appareil mumérique de la Classe B respecte toutes les exigences du Réglement
sur le matériel brouilleur du Canada.

Important

Parts of this manual are subject to change without prior notice.
In no event will the company be liable for direct, indirect, special, incidental, or
consequential damages as a result of handling or operating the machine.

Trademarks

Microsoft, Windows, and MS-DOS are registered trademarks of Microsoft
Corporation.

General Notice:

Other product names used herein are for identification purpose only and may be
trademarks of their respective companies. We disclaim any and all rights in those marks.

Copyright



Copyright, 1997 Ricoh Co., Ltd.

All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission.

«
1
2
3
4
...
»

Содержание IS01 - IS 01












































































Отзывы:

Нет отзывов

Похожие инструкции для IS01 - IS 01

Бренд: R&S Страницы: 157

Бренд: R&S Страницы: 10

Бренд: Grecom Страницы: 47

Бренд: Uniden Страницы: 61

IRISPEN EXECUTIVE 6-MAC

Бренд: I.R.I.S. Страницы: 58

OK 300 Hybrid Color

Бренд: Zeutschel Страницы: 68

Бренд: Avision Страницы: 20

Бренд: Plustek Страницы: 50

Бренд: polyga Страницы: 8

Бренд: Marktrace Страницы: 9

Бренд: Adaptive Recognition Страницы: 21

Бренд: Faro Страницы: 5

Бренд: Uniden Страницы: 58

Бренд: Uniden Страницы: 148

ScanFront 300eP

Бренд: Canon Страницы: 2

Бренд: Panasonic Страницы: 73

Бренд: Xerox Страницы: 2

Бренд: Denso Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды