Ricoh IS 2235 Скачать руководство пользователя страница 131

Страница: 131 / 196

Loading Paper

119

Loading Paper

Reference

For paper types and sizes, see
p.173 “Copy Paper”.

Loading Paper into Paper
Trays

Note

❒

You can change the paper size, see
p.134 “Changing the Paper Size”.

Pull the paper tray out slowly un-
til it stops.

Square the paper, and then load it
into the tray.

Important

❒

Check that the top of the stack is
not higher than the limit mark
inside the tray.

❒

Make sure the paper stack is
flush against the right side
fence.

Note

❒

Fan the paper before loading.

❒

Straighten curled or warped pa-
per before loading.

Push the paper tray in until it
stops.

Loading Paper into Large
Capacity Tray (optional)

Press the key if it is not lit.

The key blinks while the bottom
plate is moving down.

When the key stops blinking and
lights up, open the top cover.

ZDSY100J

ZKYY010J

ZDSO080J

ZDSO040J

AdonisC4-AE_zen_F_FM_forPaper.book Page 119 Thursday, May 12, 2005 3:32 PM

Содержание IS 2235





































































































































































































Результаты поиска

Содержание IS 2235

Отзывы:

Ricoh IS 2235, Руководство по настройкам, Страница: 131 / 196

Результаты поиска

Содержание IS 2235

Отзывы: