Ricoh IPSiO PJ WX3230N, Руководство пользователя

Страница: 157 / 206

157
Netw
ork/
USB memor
y
[Wired LAN settings]
<
DHCP
>
If you set DHCP to Use , the IP address of the projector is assigned automatically by the
DHCP server. If your network environment does not assign IP addresses automatically,
set
DHCP to Not use , then set the following items IP address , Subnet mask and
Gateway manually.
<
IP address
>
When
DHCP
is set to
Not use
, consult with your network administrator for the settings
below and set the
IP address
manually.
An IP address is a unique number assigned to a terminal. The format is a string of four
dot-separated three-digit numbers. (Example: 111.112.xxx.xxx)
Note: If you set the same IP address for wireless LAN with the one for wired LAN,
network function may fail to operate properly.
<
Subnet mask
>
A subnet mask is used to determine what subnet the IP address assigned to a terminal
belongs to. (Example: 255.255.xxx.xxx)
Note: If you set the same subnet work for wireless LAN with the one for wired LAN,
network function may fail to operate properly.
< Gateway >
This value specifies the IP address of the device, such as a router, to be used to access
servers outside the network. (Example: 111.112.xxx.xxx)
[Application]
< WEB browser >
Browser authentication
Browser authentication
and
Password
are factory-set to
Off
and no string,
respectively. You should set them as soon as possible.
Password
If you have forgotten your password, set it again using the menu on the main unit.
•
•