Ricoh IPSiO PJ WX3230N, Руководство пользователя

Страница: 128 / 206

128
Connect the power cord
1
Insert the power cord connector into
the AC IN socket of the projector.
2
Insert the power cord plug into a
wall or other power outlet.
The ON/STANDBY indicator will change to orange,
indicating standby mode.
Turn the power on
1
Remove the lens cap.
Be sure to remove the lens cap when the power is turned on. If the cap is left on the
projector, it could become deformed due to heat.
2
Press the ON/STANDBY button.
The power turns on with a beep sound (if the beep
sound is set to [
On
]), and the ON/STANDBY indicator
flashes green. After a moment, the start-up screen
appears.
CAUTION
Do not look into the lens while the lamp is on. The strong light from the lamp may cause
damage to your eyesight.
Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.
Do not place your hands, face, or other objects near the air exhaust, the lamp cover or the
bottom of the unit. Doing so could result in injury and/or damage the object.
•
•
•
Notes
The start-up screen will disappear after a moment. You can also configure the system to
prevent the start-up screen from appearing. To do this, use the
Display setting
menu
p.141 .
The first time you use the projector after purchase, after the start-up screen disappears,
the start menu is displayed p.130 .
You can disable the beep sound in the
Default setting 1
menu
p.144
.
When [
Key lock
] is [
On
], the operation buttons of the projector do not work
p.145
.
When [ Password ] is [ On ], enter password then the start-up screen is displayed after the
Password entry screen disappears
p.137
.
Do not touch the lens directly with your hand.
If fingerprints or stains are left on the projection lens surface, they may interfere with the
projector’s ability to project images on the screen.
■
■
•
•
•
•
•
•
Turning the power on and off
Operations
Power cord connector
(Supplied)
Control panel
Remote
control