Ricoh InfoPrint 1767, Руководство пользователя

Страница: 27 / 178

7
Align the tray, and insert it.
8
If a different type of paper was loaded than the type previously loaded in the tray, change the Paper Type setting
for the tray from the control panel.
Using A5 or statement paper sizes
The printer trays cannot distinguish between A5- (148 x 210 mm) and statement-size (140 x 216 mm) paper when
both sizes are loaded in the printer trays. From the Size Sensing menu, specify which size you want the printer to
detect. Load
either A5- or statement-size paper in the paper trays, but not both.
Note:
The multipurpose feeder does not use auto-size sensing and can support both A5- and statement-size print
jobs. The Size Sensing setting does not affect the multipurpose feeder settings.
1
Load either A5- or statement-size paper in a paper tray.
2
Make sure the printer is turned off.
3
From the control panel, press and hold and while turning the printer on.
4
Release both buttons when
Performing Self Test
appears.
The printer performs its power-on sequence, and then
CONFIG MENU
appears.
5
Press repeatedly until
SIZE SENSING
appears, and then press .
6 Press repeatedly until appears next to the tray in which the paper is loaded, and then press .
7
Press repeatedly until
Auto
appears, and then press .
The
Statement/A5
menu appears.
8
Press repeatedly until appears next to
Sense Statement
or
Sense A5
, and then press .
Submitting Selection
appears.
9
Press until
Exit Config Menu
appears, and then press .
The printer performs its power-on sequence, and then
Ready
appears.
27