Ricoh InfoPrint 1767 Скачать руководство пользователя страница 140

Страница: 140 / 178

Press

repeatedly until

Power Saver

appears, and then press

Press

repeatedly to decrease or

repeatedly to increase the number of minutes before the printer enters

Power Saver mode, and then press

. Available settings range from 2–240 minutes.

Note:

Power Saver settings can also be adjusted by issuing a Printer Job Language (PJL) command.

Restoring the factory default settings

From the control panel, press

Press

until

Settings

appears, and then press

Press

until

Setup

appears, and then press

Press

until

Factory Defaults

appears, and then press

Press

until

Restore Now

appears, and then press

Restoring Factory Defaults

appears.

Warning:

Restore Now returns all printer settings to the factory default settings except Network/Port menu

settings. All downloads stored in RAM are deleted. Downloads stored in flash memory or on a printer hard disk
are not affected.

Encrypting the printer hard disk

This functionality is available only when a printer hard disk is installed and working properly.

Warning:

All files and resources on the printer hard disk will be deleted. Resources residing in the printer flash

memory or RAM will not be affected.

Turn the printer off.

From the control panel, press and hold

and

while turning the printer on.

Release both buttons when

Performing Self Test

appears.

The printer performs its power-on sequence, and then

CONFIG MENU

appears.

Press

repeatedly until

Disk Encryption

appears, and then press

Press

repeatedly until

appears next to

Enable

Disable

, and then press

Note:

Select

Enable

to enable hard disk encryption or

Disable

to disable hard disk encryption.

Contents will be lost. Continue?

appears.

Press

repeatedly until

Yes

appears, and then press

A progress bar appears.

Press

repeatedly until

Exit Config Menu

appears, and then press

The printer performs its power-on sequence, and then

Ready

appears.

140

Содержание InfoPrint 1767



















































































































































































Результаты поиска

Содержание InfoPrint 1767

Отзывы:

Похожие инструкции для InfoPrint 1767

Бренды по названию

Популярные бренды

Ricoh InfoPrint 1767, Руководство пользователя

Результаты поиска

Содержание InfoPrint 1767

Отзывы:

Похожие инструкции для InfoPrint 1767

Бренды по названию

Популярные бренды