Ricoh InfoPrint 1532, Руководство пользователя

Страница: 17 / 120

Installing drivers for network printing
17
3
Installing drivers for network printing
Printing a network setup page
If the printer is attached to a network, print a network setup page on the printer to verify the network connection. This page
also provides important information to configure the printer for network printing.
1
Make sure the printer is on.
2
Press on the operator panel.
3
Press until
Reports
appears, and then press .
4
Press until
Network Setup Page
appears, and then press .
Note: If an optional print server is installed,
Print Net1 Setup
appears on the display.
5
Check the first section on the network setup page, and confirm that Status is “Connected.”
If Status is “Not Connected,” the LAN drop may not be active, or the network cable may be malfunctioning.
Consult a system support person for a solution, and print another network setup page to verify the printer is
connected to the network.
Assigning a printer IP address
If the network is using DHCP, an IP address is automatically assigned connecting the network cable to the printer.
1
Look for the address under the “TCP/IP” heading on the network setup page printed in Printing a network setup
page .
2
Go to Verifying the IP settings , and begin with step 2.
If the network is not using DHCP, then manually assign an IP address to the printer. One of the easiest ways is to use the
operator panel:
1
Press on the operator panel.
2
Press until
Network/Ports
appears, and then press .
3
Press until
TCP/IP
appears, and then press .
Standard Network
appears if the printer has a network port on the printer system board. If a print server is
installed, you see
Network Option 1
.
4
Press until
Address
appears, and then press .
5
Using the numeric pad, enter the IP address. When the address is entered, press .
Submitting Selection
appears briefly.
6
Press until
Netmask
appears, and then press .
7
Using the numeric pad, enter the IP netmask. When the address is entered, press .
Submitting Selection
appears briefly.
8
Press until
Gateway
appears, and then press .