GlobalScan NX Plug-in for FileNet
User’s Guide
The GlobalScan NX Plug-in for FileNet (FileNet Plug-in) is a GlobalScan NX (GSNX) plug-in service that distributes documents
scanned using a multifunctional device (MFP) to IBM File Content Manager P8.
DBV023
FileNet Content
Management Interoperability
Services (CMIS) Server
Server with GlobalScan NX
Software Application, AdminTool,
and GlobalScan NX Plug-in for FileNet
GlobalScan NX Administrator
(Managing via Web browser)
MFP with
GlobalScan NX
Application Installed
Fig. 1:
GlobalScan NX Plug-in for FileNet Workflow
• This product is displayed as "Send to FileNet" on the MFP control panel.
• This manual explains the operation procedures for the FileNet Plug-in. For details about the operation procedures for other Ser-
vices/Filters, see
GSNX User’s Guide
.
Introduction
This manual contains detailed instructions and notes on the operation and use of this product. For your safety and benefit, read this manual
carefully before using the product. Keep this manual in a handy place for quick reference.
Important
• TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW:
• THE SUPPLIER SHALL NOT BE LIABLE FOR THE RESULT OF OPERATION OF THIS SOFTWARE OR THE USE OF THIS
DOCUMENT.
• THE SUPPLIER SHALL NOT BE LIABLE TO YOU FOR DAMAGES OR LOSS OF ANY DOCUMENT OR DATA PRODUCED BY
USING THIS SOFTWARE.
• THE SUPPLIER SHALL NOT BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES
(INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION OR LOSS OF BUSI-
NESS INFORMATION, AND THE LIKE) CAUSED BY FAILURE OF THIS SOFTWARE OR LOSS OF DOCUMENTS OR DATA,
NOR FOR ANY OTHER DAMAGES ARISING OUT OF THE USE OF THIS SOFTWARE, IF THE SUPPLIER HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
• Some illustrations or explanations in this guide may differ from your product due to improvement or change in the product.
• The contents of this document are subject to change without notice.
• No part of this document may be duplicated, replicated, reproduced in any form, modified or quoted without prior consent of the supplier.
• It is possible that any document or data stored in the computer will be damaged or lost by user error during operation or software error. Be
sure to back up of all important data beforehand. Important documents and data should always be copied or backed up. Documents and
data can be lost because of malfunction or human error. Furthermore, the customer is responsible for protection measures against computer
viruses, worms, and other harmful software.
• Do not remove or insert any disk while operating this software.
