Ricoh Gestetner 5450, Руководство по обслуживанию, Страница: 181 / 315

6. SYSTEM ADJUSTMENT 1 July, 1998
4-44
SP No. Display Function Default Settings
6-117-2 Regist Delay - 20 rpm Do not adjust. 34 0 to 255
6-117-3
Regist Delay - 30 rpm
34 0 to 255
6-117-4 Regist Delay - 60 rpm 30 0 to 255
6-117-5 Regist Delay - 75 rpm 27 0 to 255
6-117-6 Regist Delay - 90 rpm 23 0 to 255
6-117-7 Regist Delay - 105
rpm 18 0 to 255
6-117-8 Regist Delay - 120
rpm 12 0 to 255
6-118-1 A4 Skip Regist Delay
16 rpm 34 0 to 255
6-118-2 Regist Delay - 20 rpm 34 0 to 255
6-118-3 Regist Delay - 30 rpm 34 0 to 255
6-118-4 Regist Delay - 60 rpm 30 0 to 255
6-118-5 Regist Delay - 75 rpm 27 0 to 255
6-118-6
Regist Delay - 90 rpm
23 0 to 255
6-118-7 Regist Delay - 105
rpm 18 0 to 255
6-118-8 Regist Delay - 120
rpm
Do not adjust.
12 0 to 255
6-130 Drum Master Clamp
Regist See Note 11. 0 -10.0 to
10.0mm
Notes
1: 6-001 (Main scan position)
Inputting a positive number moves the image away from the operation side of the
machine. Use the point ( . ) key to switch b and –.
2: 6-002 (Scan start position)
Inputting a positive number moves the image away from the leading edge of the
printer paper. Use the point ( . ) key to switch b and –.
3: 6-010 (Master writing speed)
This changes the master feed motor speed.
Inputting a positive value stretches the image on the master. Inputting a negative
value shrinks it.
Normally, do not use this SP mode to adjust the vertical magnification. Use it only if
the vertical magnification is not satisfactory by adjusting Scanning Speed (SP6-
011).
4: 6-011 (Scanning speed)
Inputting a positive value stretches the image on the master. Inputting a negative
value shrinks it.
5: 6-050 (Operation panel LCD contrast)
0: Palest, 7: Darkest