Home Position Setting Adjustments
For the contrast, resolution, and halftone, you can select whether the settings
return to home position at the end of transmission (in a new machine, they do).
Also, you can change the home positions of these settings.
If you need other adjustments, contact a service representative.
The procedure is as follows (see page 10 if you need more information about the
User Parameter settings adjustment procedure).
1.
Function 6 0 2 2 2 2 9 1
❐
At this time, you can print a User
Parameter List if you press
→
Start
.
2. The settings for switch 00 are now
shown on the bottom line of the display.
The settings that you may need to change are those for digits 1, 2, 3, 4, 6, and 7.
The functions of these are as follows.
Digit
Purpose
1
2
Resolution home position
Digit 2 Digit 1 Setting
Digit 2 Digit 1 Setting
0 0 Normal
1 0 Darken
0 1 Lighten
1 1 Do not use this.
3
4
Resolution home position
Digit 4 Digit 3 Setting
Digit 4 Digit 3 Setting
0 0 Standard
1 0 Super Fine
0 1 Detail
1 1 Do not use this.
6
If you change any of the contrast, resolution, transmission mode, stamp, or halftone
settings before making a transmission, then:
0: The setting(s) will not return to the home position after the transmission.
1: The setting(s) will return to the home position after the transmission.
7
Halftone on/off home position
0: Off
1: On
3. If you wish to change one of the settings, press the key on the ten key pad
that corresponds to the digit that you wish to change.
Example:
3
. The value of digit 3 changes.
4. Finish:
Yes Function
USER PARAMETER PRINT LIST
DEFAULT:
01000000
SWITCH00:
01000000
YES
TO END
2 1
7
4 3
6
R
O
U
T
IN
E
O
P
E
R
A
T
IO
N
ROUTINE OPERATION
SENDING A FAX MESSAGE
57
