Ricoh B3058637, Руководство по эксплуатации

Страница: 8 / 82

Getting Acquainted
2
1
Parallel Cable Requirements
Connect the machine to your host computer using a parallel port. This machine
does not provide the parallel cable to connect the machine to the host computer.
The machine's parallel interface is a standard bi-directional interface. It requires
a standard 36-pin parallel cable compliant with IEEE 1284 and a parallel port
available on the host computer.
Note
❒
Do not use a parallel cable that is longer than 3 meters (10 feet ).
Network Connections
The optional Network Interface Board Type 185 can be installed to allow direct
connection to an Ethernet network.
The Network Interface Board supports 10BASE-T or 100BASE-TX connections.
You can use the machine in the follows network environments:
• Using the appropriate network management software and printer driver.
• Attaching the machine to a networked computer set up as a server.
*1
With the Windows NT4.0 by the computer based x86 only.
*2
Under the Windows 95/98/NT4.0 only.
In a mixed network environment, the protocol switches automatically.
Reference
For more information on installing the Network Interface Board Type 185, see
the operating instructions that comes with it.
For more information on resolving network connection problems, see P.43
“Troubleshooting”
Note
❒
Consult your network administrator before connecting your machine to a
network.
Client
Windows 95, 98, NT 4.0
*1
, 3.1x, Macintosh (optional Post-
Script 3 Kit Type 185 is required )
Driver PCL 6/5e , PostScript 3
File Server NetWare 3.x, NetWare 4.x, NetWare 5
Protocol
IPX/SPX, TCP/IP, AppleTalk, NetBEUI
*2