Ricoh AficioSP C410DN, Руководство по оборудованию

Страница: 85 / 204

IEEE 802.11b (Wireless LAN) Configuration
73
4
I
Set [ Communication Speed ] in the same way.
The factory default is [ Auto Select ] . If you need to change the transmitting
speed depending on environment you are using, select the appropriate trans-
mitting speed.
J
Print a configuration page to confirm the settings made.
Reference
For details about printing the configuration page, see “Test Printing”,
Quick Installation Guide.
Setting SSID
If [ Infrastructure ] or [ 802.11 Ad hoc ] is selected for [ Communication Mode ] , set SSID to
use for transmission.
Confirm the network administrator for SSID to use.
A
In the
[ IEEE 802.11b ]
menu, select
[ SSID Setting ]
using
{T}
or
{U}
, and then
press the
{
OK
}
key.
If an SSID has been set, you can check the SSID setting.
B
The message “Enter SSID.” appears. Press [ Text ] .
C
Enter characters using
{T}
or
{U}
, and then press the
{
OK
}
key.
You can switch among upper/lower cases, numeric codes, and symbols by
pressing
[ ABC/123 ] .
The characters that can be used are ASCII 0x20-0x7e (32 bytes).
D
Print a configuration page to confirm the settings made.