Ricoh Aficio SP C311N, Информация

Страница: 243 / 306

Host Interface Menu
59
5
Host Interface Menu Parameters
This section explains parameters that can be set on the Host Interface menu.
❖
USB Timeout
You can specify how many seconds the printer should wait before ending a
print job that is receiving via USB. If printing is frequently interrupted by data
from other ports, increase the timeout period.
Default: 60 seconds
• 15 seconds
• 60 seconds
• 300 seconds
❖
Network Timeout
You can specify how many seconds the printer should wait before ending a
print job that is receiving via Ethernet. If printing operation is frequently in-
terrupted by data from other ports, you can increase the timeout period.
Default: 60 seconds
• 15 seconds
• 60 seconds
• 300 seconds
❖
Network Setup
You can make network-related settings.
• DHCP
Select whether to set the IPv4 address automatically or manually.
Default: On
• On
• Off
Important
❒
After changing the setting, turn off the power of the printer briefly, and
then turn it on again.
• MAC Address
Check the MAC address.
• IP Address
Specify the IPv4 address.
When
[ DHCP ] is set to [ On ] , the IP address cannot be changed.
To change it, set [ DHCP ] to [ Off ] .
Contact your network administrator for information about the network
configuration.
Default: 192.0.0.192
• Subnet Mask
Specify the subnet mask.
When
[ DHCP ] is set to [ On ] , the subnet mask cannot be changed.
To change it, set [ DHCP ] to [ Off ] . Contact your network administrator for in-
formation about the network configuration.
Default: 255.255.255.0