Ricoh Aficio SP C311N, Информация

Страница: 195 / 306

Installing the Printer Driver Using USB
11
1
D
In the [ Found New Hardware Wizard ] dialog box, click [ Install from a list or specific
location (Advanced) ] , and then click [ Next > ] .
E
Select the [ Specify location ] check box, and then click [ Next > ] .
F
Insert the CD-ROM into the CD-ROM drive.
When Auto Run starts, click [ Exit ] .
G
Specify the location where the source files of the printer driver is stored.
If the CD-ROM drive is D, the source files of the PostScript printer driver are
stored in the following location:
D:\DRIVERS\PS\XP_VISTA\(Language)\DISK1
H
Check the printer driver location, and then click [ OK ] .
I
Click [ Next > ] .
J
Click [ Finish ] .
If the printer driver has already been installed, plug and play is enabled, and
the icon of the printer connected to the “USB001” port is added to the
[ Printers ]
window.
Note
❒
To disable Auto Run, press the
{
Shift
}
key when inserting the CD-ROM
into the drive and keep it pressed until the computer finishes reading from
the CD-ROM.
❒
The number after “USB” varies depending on the number of printers con-
nected.
❒
The USB port is available only for the printer driver that is installed first.
To install additional drivers for this printer, install them using other ports
(such as LPT1). Then, after the installation, change the port settings to the
specified USB port.