Ricoh Aficio MP C2030 Скачать руководство пользователя страница 307

Страница: 307 / 1171

Electrical Components

SM 4-137

D037/D038/D040/D041

cem

& Adju

men

Disposal of HDD Units

Never remove an HDD unit from the work site without the consent of the client.

If the customer has any concerns about the security of any information on the HDD,

the HDD must remain with the customer for disposal or safe keeping.

The HDD may contain proprietary or classified (Confidential, Secret) information.

Specifically, the HDD contains document server documents and data stored in

temporary files created automatically during copy job sorting and jam recovery. Such

data is stored on the HDD in a special format so it cannot normally be read but can be

recovered with illegal methods.

Reinstallation

Explain to the customer that the following information stored on the HDD is lost when the

HDD is replaced:

Document server documents

Custom-made

stamps

Document server address book

The address book and document server documents (if needed) must be input again.

If you previously backed up the address book to an SD card with SP5846 051, you can use

SP 5846 052 to copy the data from the SD card to the hard disk.

If the customer is using the Data Overwrite Security feature, the DOS function must be set

up again. For more, see Section 1 (Installation).

If the customer is using the optional Browser Unit, this unit must be installed again. For

more, see Section 1 (Installation).

4.15.12 NVRAM REPLACEMENT PROCEDURE

NVRAM on the BCU

1. Make sure that you have the SMC report (factory settings). This report comes with the

machine.

2. Output the SMC data (

SP5-990-001) if possible.

3. Turn the main switch off.

4. Install an SD card into SD card slot 2. Then turn the main power on.

5. Copy the NVRAM data to an SD card (

SP5-824-001) if possible.

6. Turn off the main switch. Then unplug the power cord.

7. Replace the NVRAM on the BCU and reassemble the machine.

8. Plug in the power cord. Then turn the main switch on.

9. SC995-01

occurs.

10. Copy the data from the SD card to the NVRAM (

SP5-825-001) if you have

Содержание Aficio MP C2030




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Aficio MP C2030

Отзывы:

Похожие инструкции для Aficio MP C2030

Бренды по названию

Популярные бренды

Ricoh Aficio MP C2030, Руководство по обслуживанию

Результаты поиска

Содержание Aficio MP C2030

Отзывы:

Похожие инструкции для Aficio MP C2030

Бренды по названию

Популярные бренды