Ricoh Aficio MP C2030 Скачать руководство пользователя страница 29

Страница: 29 / 1171

Safety Devices

Never remove any safety device unless it requires replacement. Always replace

safety devices immediately.

Never do any procedure that defeats the function of any safety device.

Modification or removal of a safety device (fuse, switch, etc.) could lead to a fire

and personal injury. Always test the operation of the machine to ensure that it is

operating normally and safely after removal and replacement of any safety device.

For replacements use only the correct fuses or circuit breakers rated for use with

the machine. Using replacement devices not designed for use with the machine

could lead to a fire and personal injuries.

Organic Cleaners

During preventive maintenance, never use any organic cleaners (alcohol, etc.)

other than those described in the service manual.

Make sure the room is well ventilated before using any organic cleaner. Use

organic solvents in small amounts to avoid breathing the fumes and becoming

nauseous.

Switch the machine off, unplug it, and allow it to cool before doing preventive

maintenance. To avoid fire or explosion, never use an organic cleaner near any

part that generates heat.

Wash your hands thoroughly after cleaning parts with an organic cleaner to

contamination of food, drinks, etc. which could cause illness.

Clean the floor completely after accidental spillage of silicone oil or other materials

to prevent slippery surfaces that could cause accidents leading to hand or leg

injuries. Use "My Ace" Silicone Oil Remover (or dry rags) to soak up spills. For

more details, please refer to Technical Bulletin "Silicone Oil Removal" (A024-50).

Lithium Batteries

Always replace a lithium battery on a PCB with the same type of battery

prescribed for use on that board. Replacing a lithium battery with any type other

than the one prescribed for use on the board could lead to an explosion or damage

to the PCB.

Never discard used batteries by mixing them with other trash. Remove them from

the work site and dispose of them in accordance with local laws and regulations

regarding the disposal of such items.

Содержание Aficio MP C2030




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Aficio MP C2030

Отзывы:

Похожие инструкции для Aficio MP C2030

Бренды по названию

Популярные бренды

Ricoh Aficio MP C2030, Руководство по обслуживанию

Результаты поиска

Содержание Aficio MP C2030

Отзывы:

Похожие инструкции для Aficio MP C2030

Бренды по названию

Популярные бренды