Ricoh Aficio MP C2030 Скачать руководство пользователя страница 348

Страница: 348 / 1171

Card Save Function

D037/D038/D040/D041 5-36

5.11 CARD SAVE FUNCTION

5.11.1 OVERVIEW

Card Save:

The Card Save function is used to save print jobs received by the printer on an SD

card with no print output. Card Save mode is toggled using printer Bit Switch #1 bit

number 4. Card Save will remain enabled until the SD card becomes full, or until all file

names have been used.

Captures are stored on the SD card in the folder /prt/cardsave. File names are

assigned sequentially from PRT00000.prn to PRT99999.prn. An additional file

PRT.CTL will be created. This file contains a list of all files created on the card by the

card save function.

Previously stored files on the SD card can be overwritten or left intact. Card Save SD

has “Add” and “New” menu items.

Card Save (Add):

Appends files to the SD Card. Does not overwrite existing files.

If the card becomes full or if all file names are used, an error will be displayed on

the operation panel. Subsequent jobs will not be stored.

Card Save (New):

Overwrites files in the card's /prt/cardsave directory.

Limitation:

Card Save cannot be used with PJL Status Readback commands. PJL Status

Readbacks will not work. In addition they will cause the Card Save to fail.

5.11.2 PROCEDURE

For D038/D041

1. Turn the main power switch OFF.

2. Insert the SD card into slot 2. Then turn the power ON.

3. Enter SP mode.

4. Select the “Printer Sp”.

5. Select SP-1001 "Bit Switch”.

Содержание Aficio MP C2030




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Aficio MP C2030

Отзывы:

Похожие инструкции для Aficio MP C2030

Бренды по названию

Популярные бренды

Ricoh Aficio MP C2030, Руководство по обслуживанию

Результаты поиска

Содержание Aficio MP C2030

Отзывы:

Похожие инструкции для Aficio MP C2030

Бренды по названию

Популярные бренды