Ricoh Aficio MP C2030, Руководство по обслуживанию

Страница: 462 / 1171

SC Tables
D037/D038/D040/D041 4-40 SM Appendix
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
ƒ Controller board defective
ƒ Operation panel connector loose or defective
1. Check the harness connection.
2. Replace the controller board.
No. Sub code Type Details (Symptom, Possible Cause, Troubleshooting)
681 001 ~ 005 D RFID: Communication error due to the following:
ƒ Poor connection with harness that connects RFID
controller board and BCU board
ƒ Defective RFID controller board.
ƒ Defective BCU board
ƒ Electrical noise
ƒ Check the connection of the harness that runs
between the RFID controller board and BCU board.
ƒ Check the connection of the GND line for the ITB
unit.
ƒ Check the physical condition of this harness and
replace it if it is damaged.
ƒ Replace the RFID controller board.
ƒ Replace the BCU board
061 ~ 064 D
RFID: Communication error due to the following:
ƒ Defective RFID reader and writer
ƒ Defective RFID controller board
ƒ Electrical noise
ƒ Replace the toner cartridge for the affected color
(See table below).
ƒ Replace the BCU board
ƒ Replace the RFID controller board.
071 ~ 074 D
RFID: Communication error due to the following:
ƒ Defective RFID reader and writer
ƒ Defective RFID controller board
ƒ Electrical noise
ƒ Replace the toner cartridge for the affected color
(See table below).
ƒ Replace the RFID controller board.
081 ~ 164 D
RFID: Communication error due to the following:
ƒ Defective RFID reader and writer
ƒ Electrical noise
⇒
Rev. 04/29/2011