Ricoh GXe3300N
OeM driver Initialization
PAGe 1
of 2 >>
Before you install the ChromaBlast GXe3300N driver, you will need to initialize the Ricoh OEM driver.
NOTE:
Your screens and menus may differ depending on the version of software and operating
system you are using. However, the settings will be the same.
1.) Begin by clicking your
start
icon (
see Figure 1 > 1
) and select
Printers and Faxes
(
see Figure 1 > 2
).
This will open the
Printers and Faxes
window (
see Figure 2
).
2.) Right-click on the
Ricoh GX e3300N printer
icon (
see Figure 2 > 1
) and select
Properties
(
see Figure 2
> 2
). This will open the
Gelsprinter GX e3300N Properties
window (
see Figure 3
).
NOTE:
If you are running
Widows 7
, you will need to select
Printer Properties
.
FIGURE 1
FIGURE 2
2
1
1
2
