Ricoh Aficio 2090, Сетевое руководство

Страница: 54 / 126

Using the Printer Function
46
5
C
Press the
{{{{
INSERT
}}}}
key to select
a queue serviced by the print-
er.
Note
❒
You can select more than one
queue at a time.
D
Follow the instructions on
screen to make other necessary
settings.
When you have finished the
above steps, make sure that the
queues are assigned.
E
Press the [ ESC ] key until “Ex-
it?” appears, and then click
[ Yes ] to exit PCONSOLE.
F
Start the print server by enter-
ing the following from the key-
board of the NetWare Server.
If it is running, restart after exit-
ing.
❖ ❖ ❖ ❖
To exit
CAREE: unload pserver
❖ ❖ ❖ ❖
To start
CAREE: load pserver
print_server_name
Note
❒
If the printer works as config-
ured, “Waiting for job” ap-
pears.
❒
NetWare 3.x ends here.
NetWare 4.x, 5/5.1, 6
AAAA
Log on to the file server as an ad-
ministrator, or equivalent.
BBBB
Run SmartNetMonitor for Ad-
min.
CCCC
Click the [ Group ] menu, point to
[ Search Device ] , and then select
[ IPX/SPX ] .
A list of machines appears.
DDDD
In the list, select the printer for
which you want to change config-
uration.
EEEE
On the [ Tools ] menu, click [ NIB Set-
up Tool ]
.
NIB Setup Tool starts up.
FFFF
Click [ Configure ] , and then click
[ OK ] .
The property sheet appears.
GGGG
Click the [ General ] tab, and then
enter the name of the print server
into the
[ Device Name ] box.
HHHH
Click the [ NetWare ] tab, and then
make the following settings:
A
In the [ Print Server Name ] box,
enter the name of the print
server.
Note
❒
Type the name of the print
server within 47 characters.
B
In the
[ File Server Name ]
box, en-
ter the name of the file server
in which a print server is to be
created.
Note
❒
Clicking
[ Browse ]
, you can se-
lect a file server from those
listed in the
[ Browse ] dialog
box.