Ricoh Aficio 2090 Скачать руководство пользователя страница 112

Страница: 112 / 126

Appendix

104

SMTPC: no smtp server. connection close.

No response from the SMTP protocol. Cannot
connect to the SMTP server. This is caused by
the following:

• Another server other than the SMTP server

has been designated.

• The SMTP server port number is incorrect.

SMTPC: failed to connect smtp server.

Failed to connect the SMTP server. This is
caused by the following:

• Not connected to the network.

• The network configuration is incorrect, so

there is no response from the SMTP server.

• The SMTP server name is incorrect.

• The specified SMTP server is incorrect.

• No specified SMTP server IP address in

the DNS server.

• Another server other than the SMTP server

has been designated.

• The SMTP server port number is incorrect.

SMTPC: username or password wasn’t correct. Failed to connect the SMTP server due to an

authentication failure.

This is caused by the following:

• The specified SMTP user name is incorrect.

• The specified SMTP password is incorrect.

Messages

Causes and Solutions

Содержание Aficio 2090






























































































































Результаты поиска

Содержание Aficio 2090

Отзывы:

Бренды по названию

Популярные бренды

Ricoh Aficio 2090, Сетевое руководство

Результаты поиска

Содержание Aficio 2090

Отзывы:

Бренды по названию

Популярные бренды