Ricoh A161 Скачать руководство пользователя страница 97

Страница: 97 / 166

IS LIT: LOADING PAPER

NOTE: Regarding paper sizes that can be set,

see pages 110 and 113 ~ 114.

NOTE: If you want to change the paper size,

see page 108.

Non-recommended Paper For Paper Trays

Folded, curled, creased, or damaged paper

Torn paper

Perforated paper

Paper with conductive or low electrical resistance coating such as carbon or silver
coating

Thermal paper, art paper

Thin paper that has low stiffness

Notes For Paper

Load paper with the copy side

down in the 250-sheet and 500-sheet trays, and

with the copy side

up in the large capacity tray. If copies are curled, try turning

the copy paper over in the tray. If there is no improvement, change to copy paper
with less curl.

Do not use copy paper that has been already copied on.

The following types of paper cannot be fed from the paper tray. Load them in the
bypass feed table.

See page 45.

•

OHP transparencies

•

adhesive labels

•

translucent paper

•

post cards

Correct curls in copy paper before loading.

Fan copy paper to get air between the sheets before loading.

f-eu-6

IS LIT: LOADING PAPER

Содержание A161







































































































































































Результаты поиска

Содержание A161

Отзывы:

Ricoh A161, Руководство по эксплуатации, Страница: 97 / 166

Результаты поиска

Содержание A161

Отзывы: