Ricoh A161 Скачать руководство пользователя страница 150

Страница: 150 / 166

Environments to avoid

Locations exposed to direct sunlight or strong light (more than 1,500 lux.)

Locations directly exposed to cool air from an air conditioner or heated air from a
heater. (Sudden temperature changes might cause condensation within the cop-
ier.)

Places where the copier might be subjected to frequent strong vibration.

Dusty areas.

Areas with corrosive gases.

Places higher than 2,000 m above sea level.

Power connection

Connect the copier to a power source meeting the specifications given on the
inside front cover of this manual.

Avoid multiwiring.

Make sure that the wall outlet is near the copier and easily accessible.

Make sure the plug is firmly inserted in the outlet.

Voltage must not fluctuate more than 10%.

Do not set anything on the power cord.

Always turn the copier off when you have finished copying for the day, but leave
it plugged in.

Access to copier

Place the copier near the power source, providing clearance as shown.

f-eu-8

Copier

More than 28.5 cm

More than 70 cm

More than 10 cm

More than 39 cm

WHERE TO PUT YOUR COPIER

148

Содержание A161







































































































































































Результаты поиска

Содержание A161

Отзывы:

Ricoh A161, Руководство по эксплуатации, Страница: 150 / 166

Результаты поиска

Содержание A161

Отзывы: