Ricoh A161 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 166

Ricoh A161 Скачать руководство пользователя страница 1

INTRODUCTION

This manual contains detailed instructions on the operation and mainte-
nance of this copier. To get maximum versatility from this copier, all
operators should carefully read and follow the instructions in this manual.
Please keep this manual in a handy place near the machine.

Please read the next section before using this copier. It contains important
information related to USER SAFETY and PREVENTING EQUIPMENT
PROBLEMS.

SAFETY INFORMATION

When using your copier, the following safety precautions should always be
followed.

Safety During Operation

In this manual, all safety messages are identified by the words "WARNING"
and "CAUTION". These words mean the following:

WARNING: Important information to alert you to a situation that might cause

serious injury and damage to your property if instructions are not
followed.

CAUTION: Important information that tells how to prevent damage to equipment,

or how to avoid a situation that might cause minor injury.

WARNINGS

:

Since some parts of the copier are supplied with high electrical voltage, touch
only the parts specified in this manual.

Do not modify or replace any parts other than the ones specified in this manual.

Do not incinerate toner or toner containers. Toner dust might ignite when
exposed to open flames.

Do not store toner where it will be exposed to heat.

f-eu-1

i

1
2
3
...
»

Содержание A161







































































































































































Отзывы:

Нет отзывов