Ricoh A151, Руководство по обслуживанию на месте

Страница: 320 / 397

Mode No. Function Settings
60
Standard Image
Grid Voltage
Setting Factory use only.
Do not change the setting. 0 ~ 8
Default = 4
Refer to NOTE 5.
62
Standard ID
Sensor Grid
Voltage Setting Factory use only.
Do not change the setting. 0 ~ 8
Default = 4
Refer to NOTE 5.
63
Toner Density
Level Setting Factory use only.
Do not change the setting.
64
Toner Density
Level Display Displays the toner density level detected during
initial setting (SP65). 0 ~ 4
Setting Vsp/Vsg(%)
0:
12–15
1: 0–7
2: 8–11
3: 16–21
4: 22–100
65
Developer Initial
Setting Agitates new developer for about 5 minutes.
"50" is displayed in the copy counter when the
key is held down. Press the key to start
the initial setting.
Initial setting must be done when new
developer is installed.
The copier automatically returns to normal mode
after initial setting is completed.
66
Drum Initial
Setting Used to condition the new drum. 0: No
1: Yes
Initial setting must be done when a new drum
is installed.
The Drum Rotation Time (SP57) and the OPC
counter (SP69) are cleared.
69
OPC Counter Shows the total number of copies made with the
drum installed in the machine.
Refer to NOTE 4.
71
V
L
Correction
Selection
Selects or deselects V
L
correction.
Keep this setting at 0.
0: V
L
correction
1: No V
L
correction
77
Auto Shut Off
(Energy Star)
On/Off Selects the "Automatic Shut off" mode. 0: Yes
(Default for N.
America)
1: No
(Default for
other areas)
The copier automatically shuts itself off at the
auto shut off time selected (SP14).
78
Auto Energy
Saver Mode Selects the "Automatic Energy Saver" mode. 0: No
1: Yes
The copier automatically goes to Energy Saver
mode at the auto reset time selected (SP15).
SERVICE PROGRAM MODE
A202/A203 8-42 SM