Ricoh A151, Руководство по обслуживанию на месте

Страница: 316 / 397

15.4 SERVICE PROGRAM MODE TABLE
1. Items marked with an are different from the A151 and A152 copiers.
2. A "†" after the mode name signifies that copies can be made while in the
SP mode. (Copies can be made by pressing the key after pressing
the key.)
3. In the Function column, comments (extra information) are in italics.
4. In the
Settings
column, the default value is printed in bold letters.
5. For some SP modes, display of the settings is different between the A202
and A203 models because of the difference in the operation panel. After
entering the desired SP mode number, refer to the notes written at the
end of the table to correctly observe the displayed setting. (Which note to
refer is described inside the Function column.)
Mode No. Function Settings
5
Free Run with
Exposure Lamp
OFF †
Turn on DPS101-1, then press the key to
start the free run. Press the key to stop the
free run. Press the key in Ready mode to
turn off this mode.
Use this mode for the scanner movement check.
To save toner, remove the development unit.
Refer to NOTE 1
6
Misfeed
Detection Off † Copies are made without misfeed detection.
Press the
key to make a copy. Press the
key in Ready mode to turn off this mode.
Use this mode to check whether a paper misfeed
was caused by a sensor malfunction.
The total counter increments when copies are
made in this mode. Refer to NOTE 1
7 Aging Mode Factory use.
8
Input Check † Displays the inputs from sensors and switches.
Refer to NOTE 1 For details, see
page 46.
9
Output Check Turns on electrical components. For details, see
page 47.
11
All Indicators ON Turns on all the indicators on the operation panel.
To turn off the indicators, press the key.
14
Auto Reset
Time Setting
(Energy Star) Select the auto shut off time.
The copier main switch is shut off automatically
after the selected auto shut off time, if SP77 is at
"0". 0: 30 min.
1: 15 min.
2: 60 min.
3: 90 min.
4: 120 min.
Rev. 7/97 SERVICE PROGRAM MODE
A202/A203 8-38 SM