15
Light includes 3 work mode: DMX MODE, AUTO RUN and SOUND MODE,
Parameter definition as following:
⚫
DMX Mode
：
Under this mode, the light receive data from the DMX
controller and move.
⚫
AUTO RUN
：
Under this mode, light will run with inside code(data), ignore
data from DMX controller.
⚫
SOUND Ctrl
：
Under this mode, light ignore data from DMX controller.,
When there is a strong sound in stage, the light will run a scene, otherwise
it will keep the last scene.
⚫
M/S Choose
：
’M/S Choose’ is available when light just in ‘AUTO RUN’ or
‘SOUND Ctrl’ mode. If this item is set as ‘OFF’, the light don’t send data to
other light via DMX Cable. When ‘ON’, the data will send to other slave light
immediately.
⚫
Lamp control
：
Turn on lamp when this item is set ‘ON’, otherwise, turn off
lamp. The gap between operation is limited to 30 second.
⚫
Channel mode
：
Light support 2 DMX Channel mode: sample or extend
。
Figure 6 page of work mode
Set display
Light support 2 language, rotation display
，
Enter page as shown in Figure7 to
set parameter following:
⚫
Language
：
Select display as simplified Chinese or English.
