17
Figure 8 page of Test
Set light run parameter
Enter the page as shown in Figure 8, set the parameter of light:
⚫
Pan Invert: Reverse PAN move.
⚫
Tilt Invert: Reverse TILT mover.
⚫
Rectify enable
：
set as ‘OFF’, PAN or TILT will disable position rectify
function. As ‘ON’, when PAN or TILT lose steps, light will rectify auto.
⚫
Pan Offset: Set PAN original position.
⚫
Tilt Offset: Set TILT original position.
⚫
Lamp up when: Select lamp on mode, includes 3 mode: power on, after
reset done and manual
；
⚫
Factory setting: restore all parameter to factory setting.
