JWI-586 DIGITAL WEIGHING INDICATOR
11
5. Put on the material intended for percentage weighing, the calculated
percentage will be displayed.
WEIGHT
CHECKING
Users can set a checking weight target or target range, when the weight on the
platform reaches/exceeds the preset weight target range or is exactly equal to
the preset weight target point , alarm will beeps according to the preset beep
mode.
■
Set checking weight range (Hi - Lo)
1. Press " SET " twice. The display will show
2. To determine the high limit of the weight target range by pressing " TARE "
key repeatedly until the blinking 0 arrives at desired digit location and then
pressing " ZERO " key repeatedly until desired number shows up.
3. Press " SET " key again to enter the high limit weight into memory and
then return the unit to normal weighing mode.
4. Press " SET " key and then press " PRINT/HOLD " key.
The display will show
5. Repeat step 2 to determine the low limit of the weight target range.
6. Press " PRINT/HOLD " key to enter the low limit weight into memory and
then return the unit to normal weighing mode.
■
Set checking weight target point (Hi limit point or low limit point)
●
Set high limit only
Follow the above steps for setting checking weight target range to preset
high limit at the desired value and press the " SET " key to enter the high
limit value into memory then return the indicator to normal weighing mode.
●
Set low limit only
Preset the low limit at your desired value and press " PRINT/HOLD " key to
enter the low limit value into the memory then return the indicator to normal
weighing mode.
※
The preset high & low weight limit will be reset to
0
once the indicator is
turned off.
