JWI-586 DIGITAL WEIGHING INDICATOR
6
●
Backlight setup
Backlight is provided for getting better visibility when the unit is used in dark
environment.
1. Press " TARE " key. the display will show lit.xxx.
lit
Aut
(lit.Aut,
ON,
OFF)
Auto.
:
Backlight will be on whenever there is load
≥
9 d on the platform
and off when there is no load or load < 9 d.
ON
:
Backlight will be always on after the unit is powered on.
OFF
:
Backlight will be always off after the unit is powered on.
2. Press" SET " key to select backlight mode and leave the backlight setup.
♦
The pre-shipment enabled setting for this setup is
lit.Aut
●
Zero
band
setup
Input the weight range where the unit will display zero. The weight range is
in terms of number of display divisions set for both positive and negative
directions.
1. Press " TARE " key. the display will show
ZEro.X.
ZEro.
1
ZEro.
0,1,2,3,4,5,
2. Press " SET " key to select the range where the scale will show zero and
leave the zero band setup.
♦
The pre-shipment setting for this setup is
ZEro.
1.
●
Baud
rate
setup
Use this function to set the transmission rate of the RS-232C interface as
2,400, 4,800 or 9,600 bps.
1. Press " TARE " key. the display will show
bAu.XX.
bAu-96
2. Press " SET " to select approximate baud rate and leave this baud rate
setup.
♦
The pre-shipment setting for this setup is
bAu.96.
