JWI-586 DIGITAL WEIGHING INDICATOR
1
INSTALLATION
&
PRECAUTIONS
Environment
The weighing indicator should always be used in an environment which is free
from corrosives and temperature/humidity extremes. These factors will affect
displayed weight readings.
Before starting the operation of the indicator, please read the following
instructions and operate the scale properly.
DO
NOT
(install
the
indicator)
:
●
next to doors causing rapid temperature changes or under direct sunshine.
●
near magnetic fields or equipment that generates magnetic fields.
●
either expose the indicator to water or place in humid place. It may cause
damages on the unit.
●
either remove the display housing or separate the inside parts. It may cause
troubles on the indicator.
●
apply strong solvent such as benzene and thinner for cleaning indicator.
It may affect on the plastic material.
Always:
●
operate the indicator within the temperate range from-5
˚
C to+40
˚
C.
operations out of this range may obtain inaccurate weight readings.
●
use soft cloth with or without neutral detergent for cleaning.
●
use the rated power supply
110-120VAC
or
220-240VAC
as indicated on the
right-hand side of the display to operate indicator or charge battery (6V/4Ah).
●
use an AC power regulator to stabilize the power supply if the local electricity
supply fluctuates by more than ±
10%
Grounding
the
indicator
and
connecting
the
LOADCELL
A green wire with a terminal enclosed in the battery compartment is used for
grounding purpose.
Please connect the indicator with load cell as the following Indication.
※
It could be dangerous by using improper battery or wrong connection of
battery.
