Richmar HIVADOT, Инструкция по эксплуатации

Страница: 24 / 48

24
2. START TREATMENT
Power Device On/Off
Press and hold the [ ] until the LCD screen turns ON the device.
Repeat the same to power the device OFF.
NOTE: To preserve the battery life, if the device is not administering
treatment or a button hasn't been pressed after 1 minute, the device
will automatically power off.
CORRECT CABLE CONNECTION
Depending on the treatment method chosen on the previous
pages (Clinician Assisted Options or Self Treatment Options), the
connection of lead wires to the device, and then to the accessories, is
important for the device to emit the electrostatic pulses.
IMPORTANT:
If the method chosen requires connection to an oscillating head
applicator or the titanium element, it must connect to a GREY
lead wire.
If the method chosen requires connection to an electrode, it must
connect with a WHITE lead wire.
How to Apply Therapy
The electrostatic pulse occurs between opposing polarities by way
of the titanium rod or electrode for the patient and the applicator
or gloves for the clinician. Varying movement speeds are used to
accomplish different results throughout treatment.
Either the hand applicator or both of the clinicians gloved hands
(whichever was the chosen method) should stay in contact with the
patient's skin without lifting or stopping using varying pressures with
active and passive continuous, repetitive movements.
Movements TOWARD the center of the body should be applied with
appropriate and comfortable pressure, while movements AWAY from
the center of the body should be applied with light pressure.
Any low frequency treatments (10-40Hz), therapy should be applied
especially slow TOWARD the center of the body and quicker AWAY
from the center of the body.