Rice Lake Challenger 3 MSI-3460, Техническое руководство

Страница: 19 / 46

Setup
© Rice Lake Weighing Systems ● All Rights Reserved 15
Auto Total
This mode has three variations which are programmed in the Setup menu.
Program the
to AUTO TOTAL , it functions as Auto Total On / Auto Total Off ( Section 4.2 on page 10 ).
Set Total Mode
1. Press and simultaneously.

displays.
2. Press to scroll to

.
3. Press . The currently saved total mode displays.
4. Press to scroll through the choices.
5. With choice displayed, press to select.

displays.
6. Press to exit setup and store the settings.
4.8 Filter Setup
Changing the filter settings allows the scale to adjust to situations where there is a lot a movement in the structure. If the
reading is not stable, it can often be improved by increasing the filter setting. Settling time will be longer as the filter setting is
increased. However, the MSI-3460 employs algorithms that speed up large weight changes while still controlling vibration even
with high filter settings.
Use the following steps to set up filtering.
1. Press and simultaneously.

displays.
2. Press to scroll to

.
3. Press . The currently saved total mode displays.
4. Press to scroll through the choices.
5. With choice displayed, press to select.

displays.
6. Press to save and exit to Weigh mode.
Setpoint Description

Auto Load – ensures any settled load above the Rise Above threshold will be automatically totaled. The scale must fall below the Drop
Below threshold before the next total is allowed.

Auto Last – takes the last settled weight to auto total with. The total occurs only once the scale goes below the threshold. This allows the
load to be adjusted without a total occurring. Once the load is removed, the scale uses the last settled reading for total.

Auto High – uses the highest settled reading. This is useful for loads that can’t be removed all at once.
Table 4-3. Auto Load Selections
USER
F
POWER USER
F
USER
F
TARE
USER
F
TARE
ZERO
POWER
USER
F
USER
F
TARE
USER
F
TARE
ZERO